Opening a Guitar Pro bass tab on Android
Short answer. A bass part is not a separate kind of file. A Guitar Pro bass tab is a track inside an ordinary .gp, .gp5 or .gpx score, and a player that opens the score opens the bass with it — on its own tuning, with one line of tab per string the file says the instrument has.
Open your tab file with Tabline
What a bass player actually runs into on a phone is not the format. It is which of the file’s tracks the app decides to draw, and whether the four lines in front of you are the four you wanted. That is what this guide is about.
Will a bass tab file open on an Android phone?
Not with anything Android ships — the system has no reader for these files, which is why a
downloaded tab sits in Downloads doing nothing. It needs an app that understands the format.
Tabline opens Guitar Pro 3 through 8 (.gp, .gpx, .gp5,
.gp4, .gp3) plus MusicXML and compressed .mxl, and it works
the same whether the part inside is a bass, a guitar or a whole band. If the file is still sitting
unopened, start with how to open a Guitar Pro
file on Android; if you are not sure which of the
five Guitar Pro extensions you have, that one is
worth two minutes.
One detail helps here, because bass tabs travel through chat apps more than most: nothing in the reading depends on the file’s name. Tabline works out the format from the first bytes of the file, which is what it has to do — WhatsApp and some file managers pass a score along with the wrong MIME type, or with no extension at all.
Which track does a phone draw when the file has a bass in it?
Something has to be on the page first, and Tabline chooses in a fixed order:
- the first track that is not percussion, has at least six strings and carries a General MIDI guitar program;
- failing that, the first track that is not percussion and has any strings at all;
- failing that, whatever the file lists first.
Read that against the two files a bass player downloads. A bass-only transcription has no guitar-like track in it, so rule two catches it and the bass is what you see. A full band file has a guitar-like track in it, so rule one fires and the guitar is what you see wherever the bass sits in the list — and the bass is one tap away: the right-hand key of the transport bar is labelled with the track now on the page, and tapping it lists every track in the file with its instrument underneath. Switching tracks costs nothing, and the track you pick is remembered against that file, so the next time you open it you land on the bass rather than back on the rhythm guitar. The mechanics of that menu are covered in reading a multitrack Guitar Pro file on a phone.
Both rules need the whole condition, which is where a six-string bass surprises people — more on that next.
Four, five or six strings: what you get on the page
How many strings a track has is simply the length of its own tuning, read out of the file rather than assumed. A four-string bass track is four strings to the app, and the tab staff is drawn with a line per string, so you get four lines and not six with two left empty. A five-string gets five. The fretboard, if you have it, is built from the same number.
A six-string bass is the interesting case. The first rule above asks for six strings and a guitar program, and a bass track normally declares one of the bass programs rather than a guitar one, so a six-string bass is not taken for a guitar: it comes up through the second rule like every other bass. The one file that still puts you on the wrong part is a band score with a guitar in it as well: rule one fires on the guitar wherever it sits in the list, and you switch by hand.
What tuning is the bass track in?
Whatever the file says, per track, and the fret numbers carry none of it. Standard tunings as the string makers and tuning references describe them are E–A–D–G low to high on a four-string, usually B–E–A–D–G on a five-string with the extra string added below, and B–E–A–D–G–C on a six-string with a low B and a high C. Drop tunings on top of those are ordinary in heavier music, and a dropped bass track in a file stays dropped: switching tracks does not retune anything.
Tabline reads that list and shows it; it does not change it. If the frets look right and the pitches sound wrong, the tuning is the first thing to check, and reading the tuning off the file walks through how.
Why the bass track sounds the way it does
Every track in a tab file carries a General MIDI program number, which is the file’s own declaration of what it should sound like. In the General MIDI 1 table — as the patch lists published by notation software and the General MIDI references still have it in October 2026 — the eight bass patches are numbers 33 to 40: Acoustic Bass, Electric Bass (finger), Electric Bass (pick), Fretless Bass, Slap Bass 1, Slap Bass 2, Synth Bass 1 and Synth Bass 2. Those are the numbers most software shows; the raw MIDI byte underneath counts from zero, so the same eight sounds are 32 to 39 there. Tabline turns the number into that readable name beside each track, so “Electric Bass (pick)” in the track menu is not a guess about the part — it is what the file declares.
The sound itself comes from one General MIDI bank bundled with the app, so the bass you hear is that bank’s bass. And the number is read, never written: if a bass part was saved on the wrong patch it will play as the wrong instrument, and the fix belongs in whatever wrote the file — the same problem as a track that sounds like a piano. While one track is drawn, all of them play, which is the reason a tab file beats a printout for practice: your bass line against the band the arranger wrote.
A bass part that came out of MusicXML
MusicXML has parts rather than tracks, and most exporters write one instrument per part, which maps onto the track list cleanly. There is one case that goes wrong and is worth stating plainly: a single part that declares several instruments and tags its notes with them is mis-imported by the engine Tabline uses, and those notes come out as a percussion articulation — in our own test file, 242 of 245 note-ons in such a part landed on MIDI note 0. The page is drawn correctly and the pitches you hear are wrong. It is not fixed and not worked around. Files written one instrument to a part, which is what Guitar Pro and Songsterr export, do not meet it. There is more on the format in opening MusicXML and .mxl on Android.
The other thing to expect from an export is a part with no strings and no frets at all, written as pitches only. There is nothing for a tab staff to stand on in that, so you read it as notation.
What costs money, and what does not
Opening a file, reading it as notation and tab, playing it back, switching tracks, the count-in and the metronome are all free. The practice tools are a one-time unlock — you pay once, with no subscription: the speed trainer, A–B looping, the per-track mixer and the live fretboard. For a bass player the mixer is usually the one that matters, because muting the bass so you can play it yourself is the whole exercise; the method itself is in slowing a hard bar down and looping it.
The short version
There is no such thing as a bass file. There is a score with a bass track in it, and the two things worth knowing are that a bass-only file opens on the bass, and that a band file opens on the guitar until you tap the track key. After that the file tells the app how many strings to draw, what they are tuned to and what they should sound like — and all three of those are in the file, not in the app.
Read the bass line the file actually carries
Tabline opens .gp, .gpx, .gp5, .gp4, .gp3, MusicXML and .mxl, draws each track on its own tuning, and plays them back.
