Your Guitar Pro file opens on Android but there is no sound
Short answer. On a phone, ignore the soundbank advice: that is for the desktop program. A Guitar Pro file with no sound on Android is usually the media volume, a track the file itself saved muted or soloed, or a score with no notes in it. Tabline ships its one sound bank inside the app.
Open your tab file and hear it
The page draws, the cursor moves, and nothing comes out. This guide is about playing a Guitar Pro or MusicXML file on an Android phone, not about the desktop program that wrote the file. If it is not opening at all, that is a different problem — your Guitar Pro file will not open covers it.
Why “install the soundbanks” does not apply on a phone
Search this symptom and almost every page you get is about the desktop program, whose own support articles answer it by having you install the RSE soundbanks and then check the audio and MIDI preferences — the advice as those pages read in November 2026. Both of those steps exist because the desktop program keeps its sounds outside itself.
A phone reader does not work that way, and Tabline specifically does not. Its sound bank is a file
inside the app — assets/sonivox.sf2, MS_General v0.1, about 23.7 MB of the download —
and the app never asks a server for another one. There is no bank to install, no bank to choose and
no audio device to select. Importing your own sound bank is not in this version either, so if the
app is installed, the sounds are installed.
Which is useful news when you are troubleshooting: you can cross the whole most-popular answer off the list and look at the three things that actually go wrong.
Check the phone before you blame the file
Dull, and genuinely the most common one. Work down this list before anything else:
- Media volume, not ring volume. Press volume up while the score is playing, so the slider you move is the one playback uses.
- Silent mode or Do Not Disturb. Either can leave you pressing play into nothing.
- Where the audio is going. A pair of earbuds in a drawer, still paired and still connected, is a classic: the music is playing, in the drawer.
Worth knowing: Tabline has no volume control of its own. The overall playback level is one fixed value set in the app’s code, chosen so that the densest arrangement in our test set peaks just under clipping rather than distorting. The per-track faders are part of the one-time unlock. So on a free install the phone’s media volume is the only level there is — which also means it is the only one that can be down.
The track was saved muted in the file
This is the cause people never guess, and it is a real setting. A Guitar Pro file stores a mute and a solo flag for every track, saved by whoever wrote the file. alphaTab, the engine Tabline reads files with, loads those flags and then never applies them — so Tabline ignored them too, and played every track whatever the file said.
It now applies them: the change was made in version 1.0.2, dated 29 October 2026. A track the file saved muted is silent, because that is what the file asks for. If every track in the score was saved muted — which does happen — the whole file plays silently and the app is behaving correctly.
You can check this for nothing. Open the practice sheet and look at the mixer: it lists one row per track in the score, and a track the file muted has its name dimmed. That sheet opens for everyone, so the diagnosis is free even though the cure is not: on a free install each mixer row is one tap target that offers you the unlock, because clearing a mute is the mixer’s M key, which belongs to the one-time unlock along with the faders. Without it, your options are to read a different track, or to open the file on a computer, un-mute, and save it again.
One consequence worth spelling out: if a file used to play in an older version of the app and is silent now, that is the likely reason. The silence is the new, more faithful reading of the file.
One track is soloed, so everything else goes quiet
The same flags, the other way round. Solo means “only this one”, so a score saved with the lead soloed plays the lead and nothing else. The file is not silent; the part you are reading is.
That is easy to misread, because Tabline draws one track at a time while playing the whole score — if you are reading the bass part of a multitrack Guitar Pro file and the guitar was left soloed, you will hear a guitar you cannot see and no bass at all. Switching the drawn track with the track picker, which is free, will not help here: it changes what is on the page, not what the file asked the mixer to do.
The file has no notes in it
Sometimes there is nothing to hear. A score can be structurally fine — bars, tracks, a tempo and a title — and contain no notes at all.
We have one such file in the app’s own test set, and it is instructive: it renders, it plays, and its measured audio peak is exactly zero. That is recorded as the correct result, not a bug. Every other file in that set has to render above a fixed loudness floor or the build fails, which is how we know that silence from a score which does have notes is not something we ship on purpose.
If you can see note heads and fret numbers on the page, this is not your cause. If the page looks oddly bare, open the file on a computer and check whether anything was ever written in it.
If you were expecting the backing audio track
Guitar Pro lets you attach an audio track — a recording of the real song — to a score on the desktop. Tabline does not play one. It has no code for a backing track at all: what you hear is the written notes, synthesized through the bundled bank. Guitar Pro’s own mobile app does not play a score’s embedded audio track either, according to its mobile FAQ as that reads in search results in November 2026, so it is not something peculiar to this app.
A plain audio file is not a score either. Hand Tabline an MP3 and it says so rather than trying: it plays written music, and there is nothing written in a recording.
Two things silence is not
First, a moving cursor is not proof that sound is on its way. For roughly the first ten seconds of playback the cursor runs ahead of the audio and then pauses once as it corrects itself, which comes from the audio engine underneath. Give it a few bars before concluding anything.
Second, if the file plays the wrong thing rather than nothing, none of the above applies. A part that comes out as a keyboard is the file telling you which instrument it wants — see why your tab sounds like a piano — and notes at the wrong pitch are usually the tuning the tab was written in. A click you can hear while the guitar stays quiet means the music is muted and the metronome is not, which points straight back at the mixer.
The short version
Volume and output first, because it usually is. Then the file’s own mute and solo flags, which a modern reader obeys and which no amount of tapping play will override. Then whether the score has any notes in it. The soundbank download that every search result offers you is the one fix that cannot be your problem on a phone, because the bank was never outside the app to begin with.
Open the file and hear what is in it
Tabline opens .gp, .gpx, .gp5, .gp4, .gp3, MusicXML and .mxl, draws them as notation and tab, and plays them back with its own sound bank. Opening, reading and playback are free; the practice tools are a one-time unlock.
